Home | Links | Contact |

Printed from www.nzmeccano.com

Top Home Bottom

Welcome to the document browser!

(Author: Charles)

What's this all about?

This page allows you to create your own documents within the NZMeccano web site, for all to see, and of course to read the documents created by others!

I have no idea how many different uses there might be for this, but some of the ones that come to mind include Model plans, Hints and Tips, Opinions, Reviews, News about Meccano... there must be many other categories...

This is one of those documents, to show what can be done...

Anyone can read the documents that are created, but you must log in to create a new document or edit one you've already written. This is purely to ensure that we have some control to stop the site being abused by lunatics writing spam, or writing something that might get us into trouble for whatever reason. If you have already logged in to the "Meccano Wanted" or "Gallery" section of this website, that login will let you in here too.

If you don't yet have a user name for this page, create one by clicking on this paragraph.

Please have a go -- read some of the documents listed below or log in and write some new ones for everyone else to read!

For more hints and tips on how to use the editor's cleverer features, click here.

Total number of messages on this page: 52.  This is page 1 of 9.   Next

GBrozavetrov      (at 11:39pm, Sat 13th Oct, 18)

Мы предлагаем тебе стать сетевым предпринимателем и построить свой бизнес в партнёрстве с компанией Herbalife.
Регестрируйся сейчас!
Или звони по телефону +79308033940

Andy      (at 8:44pm, Sat 13th Oct, 18)

Hi, I have tried to register on this forum but have been denied as I also have been listed as spam.
How can I get registered?
Thanks
Andy

Richard      (at 7:11am, Fri 10th Aug, 18)

Evman- I need your email address to contact you if you wish to join the Rust Bucket Forum. I can then create a profile for you.

evman      (at 1:02am, Fri 10th Aug, 18)

Greetings, I have been denied membership because
I have been listed as spam.
Could you please amend this so that I can join
Regards
Evman

klaas van der werff      (at 10:20pm, Mon 15th Jan, 18)

have a look at meccano needle loom (youtube)

GUIRAUDON JEAN CLAUDE      (at 9:42am, Mon 31st Jul, 17)

Bonjour a tous je recherche un schema electrique pour un moteur 20 volts meccano de 1932 les fils ont ete coupés par l ancien proprietaire merci de faire passé le message
merci d avance
Hello to all I am looking for an electrical schema for a motor 20 volts meccano of 1932 the wires were cut by the former owner thank you to pass the message
thank you in advance


Your name:
Your message:
Security check: (Please type in the text to prove you're a person!)
 
Login status:  You have not yet entered your user name and password. You cannot create or edit documents until you do.
Enter your user name and password to log in

Remember me

If you click on the box marked 'remember me next time', you will not have to log in again on this computer for three months.

If you don't have a user name yet, please click here

On this page...

Latest documents:

by Peter Stuart, Meccano Modellers Association Sydney Inc 
 
(Richard Smith and Neil Bedford)
Midlands Meccano Guild
102nd Meeting Model Report 
into a forum thread 
(John Rogers & Colin Bull)
Midlands Meccano Guild
101st Meeting Model Report 
Spanner Challenge 
(John Rogers and Neil Bedford)
Midlands Meccano Guild
100th Meeting Model Report 
 
A G gauge model 
(Colin Bull & Richard Smith)
Midlands Meccano Guild
99th Meeting Model Report 
98th Meeting Model Report 
 
97th Meeting Model Report 
(David Couch)
The Little Tram
An introductory Arduino project 
(G. Eiermann and M. Schild)
A Short History of MARKLIN Metall
 
96th Meeting Model Report 
83rd Meeting Model Report 
 
82nd Meeting Model Report 
Picks up three golf balls 
(Roger Marriott)
Midlands Meccano Guild
95th Meeting Model Report 
The Spanner Challenge 
 
 
 
94th Meeting Report 
(Andre Theberge)
Meccano Segway
Instructions 
(Andre Theberge)
A Meccano Segway
Arduino code 
(Andre Theberge)
A Meccano Segway
Assembly instructions 
(Michael J. Walker)
Meet the new MMG President
Geoff Wright 
The Spanner Challenge 
(Michael Walker)
Midlands Meccano Guild
93rd Model Report 
Report by Michael J. Walker. 
92nd Model Report 
(Stan Knight)
Minimal Meccano
Pocket Meccano Sets of the 1970s 
Little Lever, Bolton 
The Spanner Challenge 
91st Model Report 
(Bob Thompson)
Back to the beginning
Shop Display Model 
90th Meeting Report 
(Old Blue Gold)
Getting Old
A screwy story 
The Spanner Challenge 
Model report written by Michael J. Walker 
76th Meeting Report 
Exhibition in Nelson, New Zealand 
(Barry Gerdes)
Meccano Radio
 
 
How to flatten  
(Rod Socket)
Dear Mrs Spanner
Survival techniques for the Meccanoman's wife 
(Stan Knight)
The Top Ten Tools
Indispensable Tools for the Meccanoman 
A call for help 
The Spanner Challenge 
 
For small brass and nickel parts. Also for stripping paint and rotted zinc plating. 
(Stephen Heafield)
Waterslide Transfers
Refurbishing 0 & 00 Aero Models 
Construction details 
or Put Your Hammer Away 
Mobile Morris Crane from 1968 MM 
Bert Love's Blocksetter in colour 
The dangers of internet auctions 
(Rob Thompson pp Terry Bullingh)
BlockSetter Tower
Built by Terry Bullingham 
(Rob Thompson pp John Reid)
Captain Robert Falcon Scott
1912 Polar Sledging Party 
(Niels Gottlob)
Bucket Wheel Excavator
Transcribed from typed document with photos 
Selected Spanner messages 18th to 24th January 
Selected Spanner messages 11th to 17th January 
Selected Spanner messages 4th to 10th January 
 
(Norbert Klimmek)
Hulett Ore Unloader
A 1 to 32 Scale Model 
 
(Joe Attard of Malta)
A model ship
 
 
 
(Arup Dasgupta (ISM 652))
My E15R Motor
A repair story 
(Charles)
About Meccano
What is Meccano? 
Thoughts about modern Meccano 
Some hints and tips 
Not many in this condition I'll bet! 
 
 View all | Chat | Models | Hints and Tips | Opinion | Reviews | Mine