Home | Links | Contact |

Printed from www.nzmeccano.com

Top Home Bottom

Meccano Medium Red/Green Outfits

Here's a collection of pictures of medium red/green outfits, from various parts of this era.  When looking at any pictures or inspecting your own outfits, always be aware that it is often extremely difficult to date outfits.  The most reliable source is the guarantee slip on the inside of the box lid, which should be stamped with the month and year of packing (e.g. "1A 552" for an outfit 1A from May 1952).  But this might not mean that the rest of the outfit matches the lid, of course! Provenance and the source of the outfit is very important -- many Meccano 'dealers' rather deviously make up outfits to sell, and many of them have very little knowledge of the historical changes in the outfits.  This leads to a lot of confusion as people claim to have "unused" outfits that have little to do with what came out of Binns Road.

The manual is the other dated part of an outfit, but also by far the easiest part to replace.  Very often an otherwise quite good outfit is missing its manual, and someone puts in whatever manual they have available for the outfit number.  You should be very suspicious of the date of a manual, unless it matches exactly in condition and date to all the other details.

Although the parts contents of an outfit cannot date it exactly, they can certainly give you some pointers as to the year.  Be aware, though, that many parts regarded as obsolete were still being used up long after they had officially been replaced, particularly in accessory outfits and outfits intended for export.

The best outfits have their original stringing.  That is, the parts are still attached to their original stringing cards and have never been removed.  Although it's easy to re-string parts either to their original card or to a reproduction card, it's almost impossible to do this well enough to stand up to close scrutiny.  Things to check for to ensure original stringing include the tiny washers at the start of the stringing (they will possibly have a little rusting that has bled on to the cardboard), the chalk numbers on the back of the card transferring to the string where they overlap, and the complete lack of scratches on the back of the card where the bosses and set screws have been inserted (but not removed).

However, it is an interesting exercise to re-string outfits if the parts are in good condition.  If you have the original stringing card then it's a fairly easy job once you have a picture of where the parts go.  Very often, though, the stringing card is missing.  For many of the outfits below, there is also a link to a scan of the stringing card.  You can download and print out these scans to help you create reproduction stringing cards for the set you want.

Pictures wanted!

If you have any pictures of missing outfits below, or another picture of an outfit that is better or not quite the same as one that's already here, please help us by sending a copy of it! It would be very much appreciated.  You can email it straight to us, or upload it to the Rust Bucket forum... The brief history of the changes made during this period is shown below.  Bear these in mind when viewing the pictures...

1945 First post-war outfits up to outfit 3 released (regulations restrict the price of a toy to 15/-).  Boxes are red with an 'austerity' label about 15x8cm.
1946 Outfits up to number 6 available by the end of the year.
1947 Outfits up to number 8 available.
1948 Outfits 8a and 9 released, including the No.9 in wooden box, perhaps for export only? "Pinyon" block-setting crane manual cover introduced for all main outfits.  All manuals reprinted, even if only to remove the cross-hatching from the pre-war photos!
1950 Re-introduction of the No.10 outfit, in presentation cabinet.
1951-52 Korean war restricts the supply of nickel and brass.  Many smaller brass parts made from blackened steel or Mazak (an aluminium/zinc alloy).  In 1951 the tyres for 1" pulleys were added to outfits, which is easy to spot!
1954 The most important change in the medium red/green era.  Flexible plates gain elongated holes at the ends, triangular flexible plates are introduced, and various other new parts are designed: the 60/15 tooth gear pair (in the 10 outfit); 6-hole bush wheel and wheel disc; and various rod and strip connectors amongst others.  The box labels changed substantially, all main outfits now having a large block-setting crane pictures (about 22x14cm up to outfit 2, 32x22cm for larger outfits), and the accessory outfits had a large label showing various Meccano parts.  Manuals changed too, principally changing from the block-setting crane to the giant walking dragline for the main outfits, and to a railway breakdown crane for the accessory outfits.  Large gold small parts tins are used for most larger outfits.
1956 Manuals change again, to a yellow background with a giant walking dragline (this manual often thought of as purely a light red/green version)
1958 Colours change to light red/green.

Meccano Main Outfits

An outfit 0 from September 1950
This image does not belong to the webmasters and is copyright.
Please do not download or copy it for any purpose. It has been
kindly provided for use on this site by the image owner,
William Irwin
Click on this image to see a larger version.
Loading picture mrg00-57

Outfit 00

This outfit dates from 1957, and appears to be originally strung.
An outfit 0 from September 1950
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit0

Outfit 0

This outfit dates from September 1950, and appears to be originally strung.  Although the 1" tyres are thought of as being a 1951 introduction, I wonder whether this is correct? The tyres are the old pattern dating from 1946 onwards, and very close inspection leads me to believe that they haven't been removed from the stringing card.  To the left is a model from the manual, number 0.17 "Dockside Crane".  To download the stringing card image click HERE.
An outfit 1 from September 1952
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit1

Outfit 1

You can see that this outfit also has the 1" tyres.  The spanner and screwdriver are blackened steel rather than nickel-plated.  The guarantee slip dates from September 1952 (manual January 52), but the set has been restrung.  To download the stringing card image click HERE.
An outfit 3 from 1952
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit3

Outfit 3

This outfit has blackened pulleys and bush wheels, which dates this outfit into the 'black period' of 1951/52 during the brass shortage caused by the Korean war.  The fold-over tag at the top of the box is unusual, does anyone know exactly what date these are from? This outfit has been restrung, note the incorrect post-1954 U-shaped plate in the corner.
An outfit 5 from late 1951
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit5

Outfit 5

Another 'black period' outfit, with original stringing, from late 1951.  You can see that the U-section plate at the bottom centre is the correct version without elongated holes.  Only an unused outfit of this era will still have original small parts box labels.
An outfit 6 from 1950
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit6

Outfit 6

The first of the two-tier outfits, this has been restrung but it's been done fairly well to an averagely good reproduction stringing card.  The labels on the small parts boxes are fairly bad reproductions, but originals are very rare in good condition.
An outfit 7
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit7

Outfit 7

Another 'black period' outfit.  This one has been restrung, very well indeed.  Good reproduction labels on the small parts boxes, all the parts appear to match the correct period, and you can see the original 'extra' small parts box marked "Meccano 7" at the right.  Outfit 7's have too many parts to fit into the two standard tins, and outfit 8's have four of them.  There really should be three tins I suppose!
Pre-1951 outfit 8 upper tray
This image does not belong to the webmasters and is copyright.
Please do not download or copy it for any purpose. It has been
kindly provided for use on this site by the image owner,
Richard Payn
Click on this image to see a larger version.
Loading picture mrg8-1
A 1951-1953 outfit 8
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit8

Outfit 8

To the left, an excellent mint condition outfit 8.  This outfit dates from pre-1951 as you can tell from the lack of 1'' tyres. 
Pre-1951 outfit 8 lower tray
This image does not belong to the webmasters and is copyright.
Please do not download or copy it for any purpose. It has been
kindly provided for use on this site by the image owner,
Richard Payn
Click on this image to see a larger version.
Loading picture mrg8-2 To the right, a restrung outfit 8 from 1951-53 (the plates still have holes at the ends rather than elongated holes).  Parts are used but otherwise a reasonable job.  The small parts box labels are pretty poor quality reproductions. 
Wood-boxed Meccano outfit 9 from late 1948
Click on this image to see a larger version.
Loading picture mrg-9wood-a

Outfit 9

In Occtober 1948, outfit 9 was added to the range of outfits, which had been increasing steadily since the end of the war.  Although the pre-war outfit 9 had always been available in a choice of carton or wooden cabinet, there was no option post-war.  However, at 260/- (compared with the 8 outfit at 115/-), it is clearly the wooden boxed outfit that is on offer here.  Pricing restrictions on toys had been lifted, and Meccano decided to give the 9 outfit the best quality finish.

Wood-boxed Meccano outfit 9 from late 1948 (box, lower tray, and small parts)
Click on this image to see a larger version.
Loading picture mrg-9wood-b We can see that by the April/May price list, outfit 9 is listed as "(carton)" and has dropped to 170/-, with the outfit 10 showing as "available later".  Thus the wooden boxed outfit 9 appears to date from late 1948 to early 1949, although outfits could of course have been sold later than this.

The example shown top left was bought in Cardiff for Christmas 1948, and found by the original purchaser's grandson in excellent condition.  Although the outfit needed to be restrung, the parts were almost entirely unused.

Meccano Accessory Outfits

Outfit 00a from 1954
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture mrg00a

Outfit 00a

This outfit dates from April 1954, and is unused.  It's supplied in a soft paper/card box which is quite delicate, and sized to take the "Outfit 0" manual folded into four.  There is a small stringing card with the green parts, and a sealed plastic bag containing the tyres and nickel parts.  Outfit 00a doesn't have nuts and bolts, as in 1954 there were the same number in both outfits 00 and 0.

Note that the manual is the Outfit 0 manual, not a specially printed 00a version.  Most accessory outfits up to 6a of this period contained a special accessory outfit manual, rather than the one for the next higher outfit.

An outfit 1a from April 1956
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit1a

Outfit 1a

This outfit dates from April 1956, and is completely unused.  Note the large post-1954 label, the elonaged holes, and the green accessory manual with railway breakdown crane cover.  To download the stringing card image click HERE.
An outfit 2a from around 1949/50
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit2a

Outfit 2a

Again, you can see that this has the wrong U-shaped plate (part number 199).  It's a restrung outfit purporting to be from around 1949/50, which is otherwise quite well done to a reproduction stringing card.  The manual is dated July 1949.  The small parts box is a convincing reproduction.
An outfit 3a from February 1950
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit3a

Outfit 3a

This outfit and box are good, and it has been well re-strung (to the original card).  All would be fine, except that this manual is completely wrong, dating from 1956 (you can tell it has the post-1954 railway crane cover).  Time to look for a correct (red) 3A accessory manual and this would be a good display outfit.
An outfit 4a from August 1950
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit4a

Outfit 4a

This box dates from August 1950, and the manual from April.  But everything else about it is a fake! The parts are all restored parts (although from the correct period), the stringing card and small parts box are good reproductions.  However, it's all correctly laid out and very nicely done. 
An outfit 6a from early 1951
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit6a

Outfit 6a

This outfit 6A dates from January 1951 (I believe, the guarantee slip isn't too clear).  It does have the original stringing and a June 1949 manual. The 6A has an interesting arrangement where the boiler sits in a cut-out in the centre of the stringing card, which has flaps in the centre and edges to support it.  To download the stringing card click HERE.
An original outfit 7a from 1955
This image does not belong to the webmasters and is copyright.
Please do not download or copy it for any purpose. It has been
kindly provided for use on this site by the image owner,
Roland Jaggard
Click on this image to see a larger version.
Loading picture mrg-7a-1955

Outfit 7a

One of the rarer outfits to find in good condition, this is perhaps because the box is just one thin layer but quite large and hence not very sturdy. The jump between an outfit 7 and an outfit 8 is also fairly large, making this an expensive and (presumably) not very well-selling outfit. Note that outfit 7a of this era did come with a copy of the "Outfits 7 & 8" manual, as although the owner of an outfit 7 would already have a copy, the owner of an outfit 6 and 6a wouldn't (they would have only the "Outfit 6a" manual).

The layout of the stringing card for this outfit didn't change during the medium red/green period.


Outfit 8a from 1950/51
This image does not belong to the webmasters and is copyright.
Please do not download or copy it for any purpose. It has been
kindly provided for use on this site by the image owner,
Peter Harwood
Click on this image to see a larger version.
Loading picture mrg8a-51
An outfit 8a
All images on this site are copyright. This particular image belongs to the
webmasters, and you may copy it for your personal use, or for a non-
commercial website - if you credit the source. All other rights reserved.

Click on this image to see a larger version.
Loading picture MRGOutfit8a

Outfit 8a

To the left, a 1950 outfit 8a with original stringing.  The package of small parts included inside the boiler is shown inset over the top of the box.  Note the interesting two-layer layout of this accessory outfit, clearly showing the large number of interesting parts that make an outfit 8 into an outfit 9.

To the right, a restrung outfit with a manual dating from September 1956.  The parts are correct for this date, and mostly good, but the small parts box is very rough and the stringing cards are not well made at all. 

Outfit 9a from June 1950
Click on this image to see a larger version.
Loading picture mrg-9a-50

Outfit 9a

In May 1950, the outfit 10 was finally relaunched.  Although it was missing some pre-war elements such as the digger bucket, flywheel, and selection of motors, it was still a very fine outfit.  The price was substantially less than the pre-war equivalent, especially taking inflation into account.  Along with the 10, the enormous 9a accessory outfit was also available, and the same Welsh purchaser of the outfit 9 shown above bought its matching 9a in June 1950.  Again, this outfit is in unusually original condition – you can rarely find them better than this.  Many parts were still strung and although the parts boxes are tatty, the parts are almost without exception mint.  (The axle packs have been unwrapped, and the axles are currently stored in a plastic bag pending some reproduction work).

There are a small number of pre-war parts being used up – this outfit was supplied with a 1930's blue fan, for example, but most parts are as they remained for many years.  It is also interesting to compare this pair of outfits for finish.  The 9 outfit from 1948 has a much higher gloss to the paintwork compared with the later 9a, where the parts are noticeably less well finished.

Manuals for these outfits

Click on the following files to jump to the appropriate manual for this era. After clicking, you will see the cover of the manual and underneath it a link to download the manual to your computer. Warning: some of these manuals are very large and will take several minutes to download. You have been warned!

Early medium red/green (1945-1953)

Late medium red/green (1954-1957)

Further information

Total number of messages on this page: 35.  This is page 5 of 6.   Previous  Next

Keith Sketchley      (at 12:16pm, Sun 14th Mar, 10)

I have now examined a Meccano 10 which has those blue boxes with stark graphics, it appears to be 1955 vintage.

I'll put photos of one of the parts boxes at:
http://www.keithsketchley.com/topweb.jpg
http://www.keithsketchley.com/endbottw.jpg
http://www.keithsketchley.com/insidew.jpg

Otherwise info on the set:
Wood cabinet with two lift-out trays, medium brown outer finish, gold lettering.

Parts boxes medium blue with:
- crude-looking label on top (silouette of boy with outstreched arms, Meccano on banner encircling red earth)
- sealing label across bottom with a 10.x number on each box, such as 10.7 (presumeably to identify them in the parts stock for assembly of sets (the set did not have seven such boxes but it was definitely used).
- both labels have light blue background & medium blue border

Parts appear to be medium red/grn.
Flexible plates slotted, triangular flex plates.
Only 5 1/2 braced girders (no 12 1/2, consistent with PLs of era but set is used, ends fully braced)
Rubber tires gray, road wheels blk/red.
Crank handles red plastic.
Fan and eccentrics red.

Leaflet holder is medium green.
Leaflets dated 355, 7/8 & 9 manuals dated 455 (smaller manuals a few years earlier).
Various manuals from smaller sets in the lot are either UK or Universal.

Has #10 model leaflets 1 through 9.

Jason      (at 11:32am, Mon 16th Nov, 09)

Thank you. That must be it. I did notice that there were some marks on the yellow surfaces so that must be it.

The box is in pretty poor condition. Believe it or not, I have never seen a stringed set "in the metal". They were way before my time when I was young (!!) and I do not live in England so have never been fortunate enough to see a secondhand meccano shop or exhibition over there.

Jason      (at 4:02pm, Sun 15th Nov, 09)

Here's a good one; clearing out a load of old meccano stuff today, I found what seems to be a number 7 box without lid. It is red with yellow interior.

Nothing unusual there, except that I cannot see any holes where the parts would have been strung. Did a few escape the factory in this condition? Could someone let me know please?

I remember acquiring that box some years ago. It contained a mismatch of nickel plated parts, including some of the original channel segments. I don't think though that those parts in any way related to what the box should have contained.

Reply: The holes are in the stringing cards -- additional yellow cards that the parts are strung to, then placed in the box. It sounds like you're just missing the stringing card. You can download the layouts and sizes of these cards from this site if you want to make a reproduction one.

Jason      (at 9:58am, Thu 22nd Oct, 09)

Unless I am mistaken, the {late 40s?} early 1950s manuals did not include the list of parts required to build a particular model [no 10 manual seemingly excepted]. Oddly though, the late 1930s manuals, some of which were very similar to the post war versions did have individual parts lists. The list of parts for each model returned in 1954.

Does anybody know why this state of affairs arose? Was it a misguided bid to save paper or something??

Keith Sketchley      (at 2:09pm, Mon 27th Jul, 09)

I have seen both 1949 and 1951 number 10 manuals.

Note the gray 1” tire on the right side (a late 1950s colour), and the parts boxes in a graphics style that is not typical of 1950s goods in general (blue was used for the main set box of Gears A but the simplistic filled-in-figures graphics in the photo seem much earlier).

A number 9 set from around the same time is detailed here http://www.internationalmeccanomen.org.uk/REFERENCES/Meccano/CollandHistseries/1948nr9SetOakbox/1948.html.

Reply: Yes, look sorry guys. This page is a bit of a mess as it is so old, the 9a picture is wrong as are some others. It looks like a case of putting the wrong pictures up with the wrong dates. I have dozens of other photos and sets that need photographing and will reorganise this page soon!

John Nuttall      (at 1:11pm, Tue 14th Jul, 09)

If the 9A is 1950, as stated, it should not have the wallet of 12 leaflets in it, but the earlier set 10 manual. Presumably the wallet has found its way into the picture by mistake.


Your name:
Your message:
Security check: (Please type in the text to prove you're a person!)
 

On this page...

Recent stuff going on: