Home | Links | Contact |

Printed from www.nzmeccano.com

Top Home Bottom

BlockSetter Tower

(Author: Rob Thompson pp Terry Bullingh)

Built by Terry Bullingham

BLOCK-SETTER TOWER
A freelance design intended to be representational of the type and to support the cantilever frames I built last year.
The tower is constructed principally of stainless-steel components to a scale of 1" to 1'. The relatively large scale was chosen in order to use standard handrails and ladder-work and results in a relatively small crane with a 75' long jib, rather shorter than the frequently modelled ‘Titan' giants. I have designed the tower to straddle mainline rolling stock.
Bevel gears have been used to route the drive train through the tower to the 4 driven railway wheels. In order to ease maintenance and to ensure all shafting is appropriately supported in brass journals, I have clamped 4-way collars using narrow fishplates. This does give some problems in ensuring the securing studs are at 0.5" centres, however, l feel it is worth the effort as all the individual shafts may be removed by simply releasing the collars.

Work will now commence on construction of the enqine house and winding equipment. For those interested in trivia, the weight of the tower is over 30 lbs.
Terry Bullingham
26 March 2010
 
PS Good job Terry can't read this - he's totally blind!
 

john ozyer-key      (at 12:25am, Wed 31st Mar, 10)

I saw this model at the MMG meeting and its truly amazing. It is beautifully constructed and I think a sighted person would struggle to build. The slewing ring is actually a starter ring from a car engine.
Well done Terry.


Your name:
Your message:
Security check: (Please type in the text to prove you're a person!)
 
Login status:  You have not yet entered your user name and password. You cannot create or edit documents until you do.
Enter your user name and password to log in

Remember me

If you click on the box marked 'remember me next time', you will not have to log in again on this computer for three months.

If you don't have a user name yet, please click here

Latest documents:

 
(Neil Bedford and Richard Smith)
Midlands Meccano Guild
Model Report 
97th Meeting 
 
The Arduino Sketch 
and how to upload a Youtube or Vimeo video to the Gallery 
(Paulo Kroeff de Souza)
"Homemade" Screwed Rods
 
(Paulo Kroeff de Souza)
The Meccano driving band problem
 
(Paulo Kroeff de Souza)
Meccano Cord Reproduction
 
(Paulo Kroeff de Souza)
Substitutes for parts 142 and 155
 
(Philip Drew & Richard Smith)
Midlands Meccano Guild
105th Model Report 
92nd Model Report 
(Neil Bedford and John Rogers)
Midlands Meccano Guild
104th Model Report 
91st Model Report 
 
103rd Meeting Model Report 
by Peter Stuart, Meccano Modellers Association Sydney Inc 
(Richard Smith and Neil Bedford)
Midlands Meccano Guild
102nd Meeting Model Report 
(John Rogers & Colin Bull)
Midlands Meccano Guild
101st Meeting Model Report 
Spanner Challenge 
(John Rogers and Neil Bedford)
Midlands Meccano Guild
100th Meeting Model Report 
 
A G gauge model 
(Colin Bull & Richard Smith)
Midlands Meccano Guild
99th Meeting Model Report 
98th Meeting Model Report 
 
97th Meeting Model Report 
(David Couch)
The Little Tram
An introductory Arduino project 
(G. Eiermann and M. Schild)
A Short History of MARKLIN Metall
 
96th Meeting Model Report 
83rd Meeting Model Report 
 
82nd Meeting Model Report 
Picks up three golf balls 
(Roger Marriott)
Midlands Meccano Guild
95th Meeting Model Report 
The Spanner Challenge 
 
 
94th Meeting Report 
(Andre Theberge)
Meccano Segway
Instructions 
(Andre Theberge)
A Meccano Segway
Arduino code 
(Andre Theberge)
A Meccano Segway
Assembly instructions 
(Michael J. Walker)
Meet the new MMG President
Geoff Wright 
The Spanner Challenge 
(Michael Walker)
Midlands Meccano Guild
93rd Model Report 
Report by Michael J. Walker. 
92nd Model Report 
(Stan Knight)
Minimal Meccano
Pocket Meccano Sets of the 1970s 
Little Lever, Bolton 
The Spanner Challenge 
91st Model Report 
(Bob Thompson)
Back to the beginning
Shop Display Model 
90th Meeting Report 
(Old Blue Gold)
Getting Old
A screwy story 
The Spanner Challenge 
Model report written by Michael J. Walker 
76th Meeting Report 
Exhibition in Nelson, New Zealand 
(Barry Gerdes)
Meccano Radio
 
 
How to flatten  
(Rod Socket)
Dear Mrs Spanner
Survival techniques for the Meccanoman's wife 
(Stan Knight)
The Top Ten Tools
Indispensable Tools for the Meccanoman 
A call for help 
The Spanner Challenge 
 
For small brass and nickel parts. Also for stripping paint and rotted zinc plating. 
(Stephen Heafield)
Waterslide Transfers
Refurbishing 0 & 00 Aero Models 
Construction details 
or Put Your Hammer Away 
Mobile Morris Crane from 1968 MM 
Bert Love's Blocksetter in colour 
The dangers of internet auctions 
(Rob Thompson pp Terry Bullingh)
BlockSetter Tower
Built by Terry Bullingham 
(Rob Thompson pp John Reid)
Captain Robert Falcon Scott
1912 Polar Sledging Party 
(Niels Gottlob)
Bucket Wheel Excavator
Transcribed from typed document with photos 
Selected Spanner messages 18th to 24th January 
Selected Spanner messages 11th to 17th January 
Selected Spanner messages 4th to 10th January 
 
(Norbert Klimmek)
Hulett Ore Unloader
A 1 to 32 Scale Model 
 
(Joe Attard of Malta)
A model ship
 
 
 
(Arup Dasgupta (ISM 652))
My E15R Motor
A repair story 
(Charles)
About Meccano
What is Meccano? 
Thoughts about modern Meccano 
Some hints and tips 
Not many in this condition I'll bet! 
 
 View all | Chat | Models | Hints and Tips | Opinion | Reviews | Mine