Home | Links | Contact |

Printed from www.nzmeccano.com

Top Home Bottom

Christmas Challenge 2013

(Author: Charles)

The Spanner Challenge

The Rules

The Spanner Christmas Challenge 2013 is to build a Meccano model according to the following conditions:

  1. The only rule is the model must fit through the official gauge in all three orientations. The gauge is made from four 5½ inch strips bolted together to make a square. The corners and strengthened with corner brackets - see attached photograph. In other words the model must fit inside a virtual cube that measures 4½ x 4½ x 4½ inches.

The rules were suggested by Ralph Laughton. 

Entries

Post your entries on Spanner or directly to the Christmas Challenge 2013 gallery (or to your personal gallery and send an email to request it be moved).  Only one primary photo is permitted in the Christmas Challenge Gallery, but further photographs, videos etc can be posted to the "Extra photos" folder underneath.  Remember to refer to these in your description of the model.

Judging

All viewers may place a "rating" on each model in the Christmas Challenge Gallery, rating the model from 1 to 10 by clicking on the appropriate number underneath the thumbnail.

You may "rate" as many or as few models as you wish.

You can only "rate" each model once, but you may change that rating at any time.  An arrow underneath a thumbnail shows the rating you have given to that model. 

Every now and then, the models in the gallery will be sorted in order of their current rating.

Anonymous rating is welcome, but anonymous ratings don't affect the overall score as significantly.

Closing

The Christmas Challenge closes at midnight on Christmas Eve your local time.  The winner will receive global accolade (well, at least until next year).

If you have any interesting information or comments about this page, please add them here:


Your name:
Your message:
Security check: (Please type in the text to prove you're a person!)
 
Login status:  You have not yet entered your user name and password. You cannot create or edit documents until you do.
Enter your user name and password to log in

Remember me

If you click on the box marked 'remember me next time', you will not have to log in again on this computer for three months.

If you don't have a user name yet, please click here

On this page...

Chat:

A G gauge model 
(Colin Bull & Richard Smith)
Midlands Meccano Guild
99th Meeting Model Report 
 
(G. Eiermann and M. Schild)
A Short History of MARKLIN Metall
 
96th Meeting Model Report 
83rd Meeting Model Report 
Picks up three golf balls 
The Spanner Challenge 
 
 
94th Meeting Report 
(Michael J. Walker)
Meet the new MMG President
Geoff Wright 
The Spanner Challenge 
(Michael Walker)
Midlands Meccano Guild
93rd Model Report 
(Stan Knight)
Minimal Meccano
Pocket Meccano Sets of the 1970s 
Little Lever, Bolton 
The Spanner Challenge 
(Bob Thompson)
Back to the beginning
Shop Display Model 
90th Meeting Report 
(Old Blue Gold)
Getting Old
A screwy story 
The Spanner Challenge 
Model report written by Michael J. Walker 
Exhibition in Nelson, New Zealand 
(Barry Gerdes)
Meccano Radio
 
(Rod Socket)
Dear Mrs Spanner
Survival techniques for the Meccanoman's wife 
(Stan Knight)
The Top Ten Tools
Indispensable Tools for the Meccanoman 
A call for help 
The Spanner Challenge 
(Stephen Heafield)
Waterslide Transfers
Refurbishing 0 & 00 Aero Models 
Mobile Morris Crane from 1968 MM 
The dangers of internet auctions 
Selected Spanner messages 18th to 24th January 
Selected Spanner messages 11th to 17th January 
Selected Spanner messages 4th to 10th January 
 
 
 View all | Chat | Models | Hints and Tips | Opinion | Reviews | Mine